前言

笔者服务器环境、目录情况：

系统：CentOS 6.5

网站根目录：/home/wwwroot/test/web

为什么要用SVN？

a.方便多人协作，查看成员工作内容和工作量。

b.即便是独自一人开发项目，也非常方便代码的部署（Sublime, Zend Studio都有svn的插件，配合快捷键，提交代码非常简单），同时可以找回历史版本的文件。

1.安装

yum install subversion

2.检查是否安装成功

svnserve –version

3.创建仓库目录

mkdir –p /home/svn/test

4.创建项目

svnadmin create /home/svn/test

5.检查是否创建成功

cd /home/svn/test
ll

如果成功，test目录下会多出几个文件夹

6.进入conf目录会看到3个配置文件，生成的文件中都有英文注释说明

authz:用户权限配置

### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').

[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average

[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe
[/]
testusername = rw

# [/foo/bar]
# harry = rw
# &joe = r
# * =

# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r

passwd:用户密码

### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.

[users]
# harry = harryssecret
# sally = sallyssecret
testusername =123456

svnserve.conf:

### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)

### Visit http://subversion.tigris.org/ for more information.

[general]
### These options control access to the repository for unauthenticated
### and authenticated users. Valid values are"write","read",
### and"none". The sample settings below are the defaults.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
realm = /home/svn/test

[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit

7.启动SVN服务

svnserve -d -r /home/svn

注意：不是svnserve -d -r /home/svn/test

8.在本机安装TortoiseSVN

输入svn://你的ip地址/test

如果弹出输入账号密码的对话框，表示上述设置正确。

9.Svn commit后自动同步到网站根目录的方法

为什么需要同步呢？原因是我们commit的文件其实是提交到了svn的仓库中，svn仓库不是一个实际的网站根目录。流程如下：本地文件commit到仓库->仓库同步到根目录，可以把仓库理解为一个中转站。进入到项目下的hooks文件夹

cd /home/svn/test/hooks

把post-commit.tmpl的扩展名去掉，并赋予777权限。然后vim post-commit写入如下内容。

#!/bin/sh

export LANG=zh_CN.UTF-8
svn co svn://你的ip/test /home/wwwroot/test/web

# POST-COMMIT HOOK

# The post-commit hook is invoked after a commit. Subversion runs
# this hook by invoking a program (script, executable, binary, etc.)
# named 'post-commit' (for which this file is a template) with the
# following ordered arguments:
#
# [1] REPOS-PATH (the path to this repository)
# [2] REV (the number of the revision just committed)
#
# The default working directory for the invocation is undefined, so
# the program should set one explicitly if it cares.
#
# Because the commit has already completed and cannot be undone,
# the exit code of the hook program is ignored. The hook program
# can use the 'svnlook' utility to help it examine the
# newly-committed tree.
#
# On a Unix system, the normal procedure is to have 'post-commit'
# invoke other programs to do the real work, though it may do the
# work itself too.
#
# Note that 'post-commit' must be executable by the user(s) who will
# invoke it (typically the user httpd runs as), and that user must
# have filesystem-level permission to access the repository.
#
# On a Windows system, you should name the hook program
# 'post-commit.bat' or 'post-commit.exe',
# but the basic idea is the same.
#
# The hook program typically does not inherit the environment of
# its parent process. For example, a common problem is for the
# PATH environment variable to not be set to its usual value, so
# that subprograms fail to launch unless invoked via absolute path.
# If you're having unexpected problems with a hook program, the
# culprit may be unusual (or missing) environment variables.
#
# Here is an example hook script, for a Unix /bin/sh interpreter.
# For more examples and pre-written hooks, see those in

重要步骤：然后cd /回到根目录，执行以下语句，这一步的作用是让服务器记忆你svn的账号密码，防止出现权限等问题，首先让你输入你服务器的密码，接着输入svn的账号密码，其中会问你是否记忆，输入yes。

svn co svn://你的ip/test /home/wwwroot/test/web

至此svn已经配置完毕，并且可以实现本地一执行上传，自动同步到网站跟目录。